Skip to content
TripodApex logo — camera on a tripod icon with the TripodApex wordmark
  • Home
  • About UsExpand
    • Contact Us
  • Camera Tripods
  • Gimbal Stabilizers
  • Tripod Heads
  • Free Tools
  • Phone Tripods
  • Tripod Mounts
TripodApex logo — camera on a tripod icon with the TripodApex wordmark
Free checker

Phone Gimbal Fit Checker

Check if your phone, case and lens fit a gimbal: compares width, thickness and total weight against the clamp range and rated payload.

  • Free
  • No sign-up
  • Runs in your browser
Estimates only · data checked October 2026 · About this data

Based on the numbers you entered. Confirm against the manufacturer's current spec sheet and check the maker's rated payload. A fit result does not guarantee balance or motor performance.

Your entries and saved results stay in this browser. No account, no tool cookies, nothing you enter is sent to a server.

Quick answer

A phone gimbal compatibility checker tells you whether your phone fits a gimbal before you buy. Enter your phone’s width, thickness and weight with its case, plus any lens or add-on. Then enter the gimbal’s clamp range, thickness limit and rated payload. The checker returns FIT or NO FIT and names each problem.

How to use the Phone Gimbal Fit Checker

  1. Pick your units. Lengths can be millimeters or inches, and weights can be grams or ounces. Switching units converts any values you’ve already typed.
  2. Put your phone in the case you film with. Measure its width across the short side and its thickness at the thickest point, including any camera bump. A ruler works, and a caliper is more precise.
  3. Weigh the phone in its case on a kitchen or postal scale. Weigh any clip-on lens, light or other add-on separately and enter it as the accessory weight. Leave that field blank if you use none.
  4. Open the gimbal maker’s spec sheet. Enter the minimum and maximum compatible phone width and the rated payload, which is the maximum compatible phone weight. If the sheet lists a maximum phone thickness, enter that too.
  5. Press Check fit. Each check shows pass or fail as text and an icon, with the margin or overage. A NO FIT verdict names every check that failed.

How the fit check works

Every value is converted to millimeters and grams, using 1 in = 25.4 mm and 1 oz = 28.3495 g. Values are rounded to 0.1 before comparing. Every limit is inclusive, so a value exactly equal to a limit passes.

  • Clamp width: passes if clamp minimum ≤ phone width with case ≤ clamp maximum. The result shows the margin to the nearest limit, or how far the phone falls outside the range.
  • Thickness: passes if phone thickness with case ≤ maximum phone thickness. This check runs only when you enter a limit. Otherwise it reads “Not checked.”
  • Payload: total weight = phone weight with case + accessory weight. It passes if the total weight ≤ rated payload. Headroom = rated payload − total weight.
  • Verdict: FIT if every check that ran passes. NO FIT if any check fails. If thickness was skipped, the result reads “Fit on checks run; thickness not checked.”

Here is an example only. The gimbal limits come from DJI’s published Osmo Mobile 8 specs (width 67–84 mm, thickness 6.9–10 mm, phone weight 170–300 g). The phone figures are hypothetical.

CheckPhone (example)Gimbal limitResult
Clamp width75 mm67–84 mmPass, 8.0 mm margin
Thickness8.5 mm≤ 10 mmPass, 1.5 mm margin
Payload200 g + 0 g≤ 300 gPass, 100.0 g headroom
Example only. Use the current spec sheet for your gimbal.

Why cases and lenses cause fit problems

Phone makers list dimensions and weight for the bare phone. A case adds width and thickness, and a rugged or wallet case can push a phone past a clamp’s maximum or a thickness limit. Add-ons work the same way on weight. A clip-on lens, light or magnetic mount adds grams that count against the rated payload. That’s why the checker asks for measurements with the case on and adds accessory weight to the total.

On a spec sheet, the clamp range usually appears as “compatible phone width.” Rated payload appears as “compatible phone weight,” and some sheets add a “compatible phone thickness.” Some makers also give a minimum weight or thickness. This checker tests the maximum payload and maximum thickness only, so read the sheet for any minimums. A payload rating also may not account for extension rods, balancing or off-centre accessories. Treat a pass with very little headroom as a reason to check the details, not as a guarantee.

Methodology & sources

The checker runs the three comparisons above entirely in your browser. Nothing you enter is stored or sent anywhere. It has no built-in gimbal or phone data, so the result is only as accurate as the numbers you enter. It doesn’t test balance, motor strength or real-world performance.

  • Wikipedia: Inch: 1 inch is defined as exactly 25.4 mm.
  • Wikipedia: Ounce: 1 ounce is exactly 28.349523125 g.
  • DJI Osmo Mobile 8 specs: the source of the example limits above.
  • Your gimbal’s manufacturer spec sheet: the source for the clamp range, thickness limit and rated payload you enter.

Last updated: October 2026

FAQ

Should I measure my phone with or without the case?

With the case on, if you plan to film with it. A case adds width and thickness, and the phone’s spec page lists the bare phone only.

What if the gimbal’s spec sheet lists no maximum phone thickness?

Leave that field blank. The checker then reports thickness as “Not checked” and gives a verdict based only on the checks it could run.

Does a lens or other add-on count toward the payload?

Yes. The checker adds the accessory weight to the phone-with-case weight and compares the total with the gimbal’s rated payload.

What should I do if the result is NO FIT?

Look at which check failed. A slimmer case can solve a width or thickness problem, and removing an add-on can solve a payload problem. If none of that helps, compare against a gimbal with a wider clamp range or a higher rated payload.

Does a FIT result guarantee the gimbal will work well with my phone?

No. It only means your numbers fall within the limits you entered. Balance, extension rods and off-centre accessories can still affect performance, so check the maker’s current spec sheet and rated payload.

Related guides

  • Pocket Gimbal Camera vs Phone Gimbal: Which Gets You Smoother Footage?
  • Phone Gimbal Modes Explained: Pan Follow, Lock, FPV and More
  • Gimbal Accessories and Mounts Explained: What Each Add-On Does
  • Best Tripods for Astrophotography With Phones
  • Best Camera Gimbals with Tracking

More free tools

Camera-to-Tripod Mount Finder (1/4" vs 3/8")

Pick your camera and tripod stud to see its tripod socket thread (1/4"-20 or 3/8"-16), whether you need an adapter, and the manual source.

Gimbal Stabilizer App Finder

Find the official companion app for your gimbal by brand, model, phone OS and feature, with exact publisher names and official download links.

Light Stand Height & Payload Picker

Enter fixture and modifier weight, needed height and a safety margin to get the minimum light stand payload and height, plus matching stands.

See all free tools (9) →

  • Home
  • About Us
  • Contact Us
  • HTML SITEMAP
  • Privacy Policy
  • Terms of Service
  • Affiliate Disclaimer
  • How We Research

Please keep in mind that we may receive commissions when you click our links and make purchases. However, this does not sway our reviews and comparisons. We try our best to keep things unbiased, in order to help you make the best choice. As Amazon Associate, we earn from qualifying purchases.

© 2026 TripodApex | All Rights Reserved.

Scroll to top
  • Home
  • About Us
    • Contact Us
  • Camera Tripods
  • Gimbal Stabilizers
  • Tripod Heads
  • Free Tools
  • Phone Tripods
  • Tripod Mounts
Search